Connect with us

FW800 - SATA bridge?

Discussion in 'Misc Electronics' started by Paul Conners, Sep 6, 2011.

Scroll to continue with content
  1. Paul Conners

    Paul Conners Guest

    .. to make custom media enclosure.

    Minimum external interface is FW800. Can have SATA & USB also.

    Looking for recommendation (not pages of Google results -- those I can get
    myself).

    Either a product you've had good results with or a hardware distributor
    you've had good experience with.

    Thanks.
     
  2. josephkk

    josephkk Guest

    I have several external enclosures with various interfaces. What
    combination would you like? Then i can look at the relevant enclosures.

    ?-)
     
  3. Paul Conners

    Paul Conners Guest

    I have several external enclosures with various interfaces. What
    Prefer FW 800, USB externally, with SATA internally (or whatever the most
    recent specification of SATA is now...).

    Thanks,
    Paul
     
  4. josephkk

    josephkk Guest


    OK i will look through my stuff and see which chips are used.

    ?-)
     
  5. josephkk

    josephkk Guest

    High performance; USB3 + SATA 3:
    Unit one, Diablotek, asmedia ASM1051
    Unit two, Filemate, VLI VL700-04

    Standard performance; USB 2 SATA 2"
    Unit one, imicro, that i cannot read the chip markings.

    Oh well.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-