Connect with us

Fuse substitution

Discussion in 'Electronic Repair' started by [email protected], Nov 17, 2008.

Scroll to continue with content
  1. Guest

    This set uses two 3.5A 125V pico fuses in the convergence circuit.
    One is open. I don't have any pico fuses around the shop. After I
    replace the STK's would there be any harm in using a standard AGC or
    another fast blow 3.5A type in its place? Thanks, Lenny
     
  2. Guest

    Mainly it will look clunky but function correctly. How do you attach
    to the 3AG ?

     
  3. How long can you wait for replacements? I recently bought Littelfuse
    picofuses from Mouser.
     
  4. Andy Cuffe

    Andy Cuffe Guest

    It will work fine as long as you can insulate it so that it can't
    short to anything, and if it doesn't matter how it looks.
    Andy Cuffe

     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-