Connect with us

Full adder question

Discussion in 'Electronics Homework Help' started by n00b, Oct 17, 2014.

  1. n00b

    n00b

    11
    0
    Sep 3, 2014
    Hi, guys
    28t-fa.gif

    I'm currently simulating a full adder for a lab I have to write a report for.
    There is a question in particular that I do not fully understand
    1. Proof that S(inverted) is always pulled to ground or Vdd (but never both).

    Could someone please elaborate!
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    9,226
    1,861
    Nov 17, 2011
    Which signal is S(inverted)? Do you mean /SUM (the input of the output inverter)?
    What is the condition for this node to be connected to VDD?
    What is the condition for this node to be connected to GND?
    Can both conditions be met sumultaneously?

    By the way: your schematic would be much better readable if you added the tiny dots where lines cross to indicate an electrical connection. This is standard.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-