Connect with us

Fujitsu PDS4222

Discussion in 'Electronic Repair' started by Neil Harrington, Apr 5, 2005.

Scroll to continue with content
  1. Grateful for any help with this one....

    I have a fuji 4222 plasma that sometimes refuses to start .. once its going
    its fine... but once cold... its touch and go .. the problem is getting
    Once it stops working it leaves the red led constantly flashing which I
    believe indicates a PSU problem.
    Spoke to Fujitsu who reckoned either main PSU board ( my theory) at £450 or
    either of the two sustain boards £900 each and its guess work which one !
    Does anyone have experience of this unit or similar for a component level
    fix ( I am a qualified HV engineer but don't have any plasma experience)

    Really appreciate any help chaps

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day