fuel injectors

[sirellis]

hey all any1 have any ideas on how to power car fuel injectors whilst in an ultrasonic bath for cleaning say a variable voltage of 5-15volt and pulsing on/off at 1,500-10,000 rpm for back flushing any help would be great thanx Pete

 

[The Real Andy]

hey all any1 have any ideas on how to power car fuel injectors whilst in an ultrasonic bath for cleaning say a variable voltage of 5-15volt and pulsing on/off at 1,500-10,000 rpm for back flushing any help would be great thanx Pete

some commercial units i have seen actually run a presurised solvent
throgh the injector whilst pulsing it on and off. If this is for a one
off, go pay someone to clean them. If its for commercial use, buy a
professional unit.

 

[spock]

some commercial units i have seen actually run a presurised solvent
throgh the injector whilst pulsing it on and off. If this is for a one
off, go pay someone to clean them. If its for commercial use, buy a
professional unit.

At $25 per injector you can buy a new set for less asuming 6cylinder.