Hi all,
here my first post on this forum.
Answer to this closed thread:
https://www.electronicspoint.com/packard-bell-ft700-monitor-t107830.html
I fix the same issue as follow:
replace C809 an C811, electrolytic caps 330µF and 680µF both 16V on supply board.
I use one 390µF and two others 390µF paralleled.
Hope this can help.
cheers,
Olivier
here my first post on this forum.
Answer to this closed thread:
https://www.electronicspoint.com/packard-bell-ft700-monitor-t107830.html
I fix the same issue as follow:
replace C809 an C811, electrolytic caps 330µF and 680µF both 16V on supply board.
I use one 390µF and two others 390µF paralleled.
Hope this can help.
cheers,
Olivier