For Prototype 2 layer PTH PCBs

[Sotris]

The prices for a single 2 layers 1dm2 full prototype is only 20Euro
without VAT for foreign countries? What is the VAT if it will apply
(ie. with invoice inside EU)?
thanks

danai ([email protected])
For Prototype 2 layer PTH PCBs
View: Original Format
Groups:sci.electronics.cad, sci.electronics.design, sci.electronics.basics
2004-11-26 11:01:10 PST

If you want to get your double-sided PTH boards (either 1 to 5

prototypes or mass production), made with High Quality PCB
material(European, NOT from far-east), silkscreen, solder resist etc.
at LOW PRICES (all at Euro) then take a look at:
www.geocities.com/easy_pcb
Regards
Danai

 

[Paul Burke]

The prices for a single 2 layers 1dm2 full prototype is only 20Euro
without VAT for foreign countries? What is the VAT if it will apply
(ie. with invoice inside EU)?
thanks

The service looks OK at first glance, though the design limitations are
rather coarse (15 thou track/ space, 0.5mm holes). I'd be happier to
have a physical address of this Greek concern.

If you have a VAT number, send him that, and he won't charge you VAT
assuming he's VAT registered in Greece. You have to declare it and pay
VAT in your own country, but you can claim it back. Otherwise he charges
you VAT at Greek rates. It's bizzarre, but that's the rules.

Paul Burke

 

[[email protected]]

The service looks OK at first glance, though the design limitations are
rather coarse (15 thou track/ space, 0.5mm holes). I'd be happier to
have a physical address of this Greek concern.

If you have a VAT number, send him that, and he won't charge you VAT
assuming he's VAT registered in Greece. You have to declare it and pay
VAT in your own country, but you can claim it back. Otherwise he charges
you VAT at Greek rates. It's bizzarre, but that's the rules.

Paul Burke

 

[[email protected]]

Hi.
Well, VAT at Greece is 18% but for all orders outside Greece with
Invoice and Valid VAT number, no VAT applies from our side. Minimum
hole is 0.5mm and the minimum required pad for this is 0.9mm. Minimum
space/distance required from track to track is 0.3mm. Also the minimum
tracks width is 0.3mm. Our offices address is Alexandroupoleos 49 str,
Athens 11527, GREECE. Our fabrication facilities are at northern Greece
(Xanthi city).
Regards Danai

 

[pdmtr]

The service looks OK at first glance, though the design limitations are
rather coarse (15 thou track/ space, 0.5mm holes). I'd be happier to
have a physical address of this Greek concern.
If you have a VAT number, send him that, and he won't charge you VAT
assuming he's VAT registered in Greece. You have to declare it and pay
VAT in your own country, but you can claim it back. Otherwise he charges
you VAT at Greek rates. It's bizzarre, but that's the rules.

Paul Burke

Dear Paul
Yes I understand that.
Thank you

 

[Anders F]

I've got to mention www.run.to/pcb (Olimex) here. 26US for a Euro-board
(10x16cm) - and cheap shipping!
Been providing multiple fine prototypes for me. They are cheap - but silk
screen is seen of better quality and the pcbs are cut (not routed). But
Tsvetan panelize/cut for free: Not many will take an order like: "2pcs PCB-A
and fill with PCB-B" =)

Cheers,
Anders

 

[pdmtr]

Hi Anders.
What do you mean by the "2pcs PCB-A and fill with PCB-B" phrase? Does
Olimex say that(meaning what?), as I've checked at
www.geocities.com/easy_pcb and it doesn't mention something like that
anywhere! If you want just one board you can do it, I think And the
price from Olimex is only for prototypes PCB with standard dimension
while at easy_pcb price is always based at Euros per dm2 and not for
Euroboard!!! That means that if your board has other dimensions than
the standard Eurocard 10x16cm (for example say 20x12cm) you can't do it
based at Olimex protos price, but you can do it, I believe, at
easy_pcb, for much-much better price...

 

[[email protected]]

I've got to mention www.run.to/pcb (Olimex) here. 26US for a Euro-board
(10x16cm) - and cheap shipping!
Been providing multiple fine prototypes for me. They are cheap - but silk
screen is seen of better quality and the pcbs are cut (not routed). But
Tsvetan panelize/cut for free: Not many will take an order like: "2pcs PCB-A
and fill with PCB-B" =)

Cheers,
Anders

Hello.
Just to clarify some things... Well, all of our boards are made using
EU made laminate, that is for sure better quality than the far east
ones... and has all the EU certifications also!!! Also we do pricing
PCBs only with dimension and not with how many holes it has, etc, that
others do! anyone can order us to make a prototype PCB without the
string dimensions of 10x10cm. Just price it will be calculated based on
the rule Euroxdm2. So if the board is a total of ie. 2.2dm2 the cost
will be our pricelist reference x 2.2! That simple... Regards Danai

 

[easy_pcb]

Hello.
Just to clarify some things... Well, all of our boards are made using
EU made laminate, that is for sure better quality than the far east
ones... and has all the EU certifications also!!! Also we do pricing
PCBs only with dimension and not with how many holes it has, etc, that
others do! anyone can order us to make a prototype PCB without the
string dimensions of 10x10cm. Just price it will be calculated based on
the rule Euroxdm2. So if the board is a total of ie. 2.2dm2 the cost
will be our pricelist reference x 2.2! That simple... Regards Danai