Connect with us

Footprint - Relay and button on Altium Designer

Discussion in 'General Electronics Discussion' started by Aline, Sep 17, 2015.

Scroll to continue with content
  1. Aline

    Aline

    1
    0
    Sep 17, 2015
    Hello
    I'm doing a project, however, I need the footprint of a different button of the I have in the Altium library, and a relay too.
    I need to use HLS8l-DC12V-SC relay and a 4-pin push button.
    I'd appreciate if someone could provide me the footprint of these components, I've just started using Altium and I have no experience creating libraries. Also, I need these components urgently.
    Thanks in advance.
     
  2. Old Steve

    Old Steve

    734
    169
    Jul 23, 2015
    You'll be extremely lucky to get the footprint of the relay, and you haven't even mentioned dimensions or part number for the 4-pin pushbutton, so you have no chance there.
    Perhaps you should quickly read up on creating component footprints in Altium Studio in the manual. It can't be that hard, and you have to learn sooner or later. You'll come across this problem all the time.
    (If you'd started reading that part of the manual at the same time you posted here, you'd have already done it by now.)
     
  3. Kiwi

    Kiwi

    335
    83
    Jan 28, 2013
    Looks like you are experiencing your second childhood Steve.:D
     
  4. Old Steve

    Old Steve

    734
    169
    Jul 23, 2015
    Childhood??? That's a current pic of me. :D

    Edit: Oops, you did say 'second', so yep.
     
    Last edited: Sep 18, 2015
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-