Connect with us

FM inductors

Discussion in 'General Electronics Discussion' started by pidja105, Oct 7, 2017.

Scroll to continue with content
  1. pidja105

    pidja105

    106
    1
    Oct 16, 2015
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    10,025
    2,138
    Nov 17, 2011
    Look at the picture on that website. At the rigt you see the two hand-wound inductors. Just make sure your's look the same.

    Note that at 6 W or even "only" 500 mW this transmitter will fall under regulations in most countries. Make sure you observe the local regulations where you want to use this transmitter.
     
  3. davenn

    davenn Moderator

    13,584
    1,869
    Sep 5, 2009

    I would look for another design, that one is crap
    firstly a lot of the circuit board components dot even equal the schematic values and some of them are not even there

    do you have a frequency counter, to tune a construction to the correct frequency ?
     
  4. pidja105

    pidja105

    106
    1
    Oct 16, 2015
  5. CDRIVE

    CDRIVE Hauling 10' pipe on a Trek Shift3

    4,960
    648
    May 8, 2012
    Being owner of two topics that are essentially asking the same question will not win you our favorite "Nube Of The Month" award. o_O
    FM Transmitter Power

    Chris
     
  6. davenn

    davenn Moderator

    13,584
    1,869
    Sep 5, 2009
    agreed .... threads now merged but not with the one you thought, Chris .... but an earlier one
     
    Last edited: Oct 14, 2017
  7. davenn

    davenn Moderator

    13,584
    1,869
    Sep 5, 2009
    I doubt that it will produce 6W and anything over 1 watt will probably be a very dirty signal

    read what you were told above
     
  8. CDRIVE

    CDRIVE Hauling 10' pipe on a Trek Shift3

    4,960
    648
    May 8, 2012
    Dave, I think most would question themselves as to exactly how that happened. It's still happy hour here. So I'll just try to figure it out later. :):confused:

    Chris
     
  9. davenn

    davenn Moderator

    13,584
    1,869
    Sep 5, 2009
    I recognised the link he had in the post as being the same as the one in the inductors post
    so moved it here instead :)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-