Connect with us

flyback transformer pins

Discussion in 'Electronic Repair' started by hello, Aug 19, 2004.

Scroll to continue with content
  1. hello

    hello Guest

    Hi,

    Does anyone know information on the pins around the horseshoe shaped ring on
    the bottom of a flyback transformer? What pins are primary, etc...

    Thanks,

    Greg
     
  2. There is no standard. Only way to know for sure is to get the specs
    for the particular model flyback.

    You can determine a lot with an ohmmeter though. See the Flyback Testing
    FAQ at the site below.

    --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/
    Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
    +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm
    | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

    Note: These links are hopefully temporary until we can sort out the excessive
    traffic on Repairfaq.org.

    Important: Anything sent to the email address in the message header is ignored.
    To contact me, please use the feedback form on the S.E.R FAQ Web sites.
     
  3. Franc Zabkar

    Franc Zabkar Guest

    HR Diemen have a substitution guide with electrical data on a wide
    variety of flybacks.

    http://www.hrdiemen.es/indexeng.shtml


    - Franc Zabkar
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-