Connect with us

Fluke/Gigatronics 6080A signal generator - Need GPIB commands

Reply to Thread

Discussion in 'Electronic Equipment' started by Jim Flanagan, Dec 21, 2007.

Scroll to continue with content
  1. Dec 21, 2007 #1
    Jim Flanagan

    Jim Flanagan Guest

    Does anyone have a copy of the gpib commnands that they would
    share?

    Thanks
    Jim Flanagan
     
  2. Dec 22, 2007 #2
    mng

    mng Guest

    Hi Jim,

    The 6080A operator's manual is available from Fluke's website.
    Hopefully it has what you're looking for.

    This link might not work: http://assets.fluke.com/manuals/608XA___omeng0100.pdf
    You may have to navigate through their website to get it.

    Cheers,
    Mike
     
  3. Dec 22, 2007 #3
    Jim Flanagan

    Jim Flanagan Guest


    Thanks, Mike...
    About an hour after I posted my request. I came across the manual on
    the Fluke website. Why I didn't try that first, I don't know.
    Thank you for responding to my request.

    Take care.
    Jim
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Fluke 6080A Signal Generator Firmware

  2. Fluke 6080a/an signal generator parts needed

  3. HP3325A GPIB Commands wanted

  4. Fluke 6080a Display Problem

  5. need Goodwill PPS power supply gpib commands

  6. Advantest R6245 GPIB commands

  7. Fluke 6080A/AN SERVICE MANUAL WANTED

  8. Having problems with certain GPIB commands

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-