Connect with us

Fluke 87 LCD display stucked in auto test

Discussion in 'Electronic Equipment' started by Valdemir Santos, Aug 9, 2013.

Scroll to continue with content
  1. Hi,
    My Fluke 87 multimeter is stucked in LCD auto test mode.
    I turn on multimeter, and all segments stays on.
    Is there any way to fix this ?
    Thanks
     
  2. Fred Abse

    Fred Abse Guest

    That's what happens when you switch on with the "AutoHold" button pressed.
    Check for stuck buttons. It can easily happen if you've had the case off.
     
  3. Robert Baer

    Robert Baer Guest

    Term is "stuckacated", not "stucked".
     
  4. Shaun

    Shaun Guest

    "Valdemir Santos" wrote in message

    Hi,
    My Fluke 87 multimeter is stucked in LCD auto test mode.
    I turn on multimeter, and all segments stays on.
    Is there any way to fix this ?
    Thanks


    I would recommend some percussive maintenance for the meter. Throw it onto
    the floor, that should fix it.
     

  5. I changed 9v battery, and it´s working fine again.
    Fluke 87 is unbreakable !
    Thanks
     
  6. Fred Abse

    Fred Abse Guest

    Stickified?

    Adheserated?
     
  7. Fred Abse

    Fred Abse Guest

    Battery flag should have come on much earlier.
    Give it to me. I'll break it ;-)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-