Connect with us

fluke 787 repair/ service manual needed

Discussion in 'Troubleshooting and Repair' started by KeV, Apr 19, 2010.

Scroll to continue with content
  1. KeV

    KeV

    1
    0
    Apr 19, 2010
    Hi all, I'm new here and hoping to gain more knowledge in electronics. Right now I've got two Fluke 787 that are non functional.

    1st one turns on but displays OL in all ranges.

    2nd one turns on but displays UNCAL

    I'm looking for the service manual and havn't found it yet.

    btw does anyone have any Fluke troubleshooting hints related to OL or UNCAL for the 787??

    Thanks a lot!
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,473
    2,819
    Jan 21, 2010
    Working test instruments are always a good first step when you start to repair something.

    I suspect the second one has detected that it needs calibration.
     
  3. jerryg50

    jerryg50

    57
    0
    Apr 18, 2010
    Fluke Meter Service

    Fluke are excellent instruments. They may supply the schematics for a fee. I am not sure. Normally you should give the meter to them for service. They service them mostly at the modular level. They can also calibrate the meter for you, which you would not normally be able to do yourself.

    We send out our Fluke instruments once each year for calibration, service, and certification.

    In consideration of the usefulness and the high cost of a new Fluke meter they are worth to send out for factory service. Fluke is not very expensive for their service charges.


    Jerry G.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-