Connect with us

FLUKE 199C - no channel traces

Discussion in 'Troubleshooting and Repair' started by Nando, May 5, 2017.

Scroll to continue with content
  1. Nando

    Nando

    2
    0
    May 5, 2017
    I have a FLUKE 199C that has always worked very well; After a long period of inactivity (more than a year) I have restarted it after recharging the battery, it works all the time, except for the total lack of tracks on both channels. FLUKE assistance tells me that the input chips have failed, but it is not possible that they have failed with a power off; I suggest that it has always been kept in a dry and air conditioned place. I would be grateful if you could help me put it back in operation.
     
    Last edited by a moderator: May 5, 2017
  2. KilgoreCemetery

    KilgoreCemetery

    240
    11
    Apr 12, 2017
    Sounds like a tricky one. Other than taking good care of the unit, what makes you think that it is not the input chips? I think we can both agree that they should stay working when treated right, sometimes chips just fail. Either way, here's a service manual that we can start with: Service Manual
     
  3. Nando

    Nando

    2
    0
    May 5, 2017
    thank you very much
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-