Connect with us

Flickering Flame circuit

Discussion in 'Electronic Basics' started by Grey, Oct 19, 2004.

Scroll to continue with content
  1. Grey

    Grey Guest

    I am building a model village and would like to add a small lighting effect
    to simulate a candle/flame burning. Is there a way I can drive a small bulb
    of around 6-9v to produce "random" levels of brightness to simulate a flame?

    Graham
     
  2. David Harmon

    David Harmon Guest

    On Tue, 19 Oct 2004 16:56:05 +0000 (UTC) in sci.electronics.basics, "Grey"
    Flickering light
    * theory
    http://wolfstone.halloweenhost.com/TechBase/flkint_Flicker.html
    * practice
    http://wolfstone.halloweenhost.com/TechBase/flktch_FlickerTechniques.html
    * commercial flicker
    http://wolfstone.halloweenhost.com/TechBase/flkbuy_CommercialFlicker.html
     
  3. Richard

    Richard Guest

    Hmmm I was just working on this for an architect. There's a lot of
    schematics here;

    http://wolfstone.halloweenhost.com/TechBase/flktch_FlickerTechniques.html

    and when I was doing research I found a site with a lot of these
    effects for a model railroad. If I find it again I'll post it.

    Richard
     
  4. http://www.srkconsulting.com/candles/howto.html

    Adam
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-