Maker Pro
Maker Pro

Fix treadmill

Barney

Aug 27, 2017
1
Joined
Aug 27, 2017
Messages
1
My treadmill wiring diagram is attached. The motor is fine and there is power to the top console. The console lights up but does not start the machine. I don't need all the gimmicks including the incline. I was thinking if I could just patch a potentiometer to start it and regulate the speed. What wires coming out of the top console would I attach to the pot? Thanks!!!
 

Attachments

  • Treadmill Schematic.pdf
    533.1 KB · Views: 122

Minder

Apr 24, 2015
3,478
Joined
Apr 24, 2015
Messages
3,478
The MC2100 is a PWM controller, I have a few PDF's on it but can't upload on this site as files are too large.
If you P.M. me an email address I can sent them.
M.
 

73's de Edd

Aug 21, 2015
3,609
Joined
Aug 21, 2015
Messages
3,609
Sir Barney . . . . .


RE . . . . . . .MC2100 controller board


MOTOR SPEED CONTROL VIA POTENTIOMETER ADJUSTMENT:

Check out Doug’s post of 9:27 AM of Nov 2, 2015, for his demo VIDEO of an operating MOTOR unit and the circuitry being used . . . . . . NO Arduino nor bang-bang coding involved . . . . just PWM driver circuitry.

https://sonsofinvention.wordpress.c...fication-of-the-original-mc-2100-pwm-circuit/


See the schematic and its circuitry at :

https://sonsofinvention.wordpress.c...native-mc-2100-dashboard-replacement-circuit/

http://el34world.com/Misc/Cnc/TreadmillMotor1.htm

73’s de Edd
 
Top