Connect with us

finding the right part?

Discussion in 'Datasheets, Manuals and Component Identification' started by [email protected], Jan 18, 2012.

Scroll to continue with content
  1. henrik.lund.mathiesen@gma

    [email protected]

    Jan 18, 2012
    Hi I'm trying to repair a induction cooking plate that has a fault.
    i found out that the driver for one of the igbt (HGTG20N60A4D) is defect. i switched until i moved the error.

    I just don´t know what this driver is so i cannot find a new one.

    i attach a picture of the IGBT and also the driver hope someone outthere can help me with a part number or??

    text on the dip-8 igbt driver 1st line A 3126 2nd line 0633

    Attached Files:

    Last edited: Feb 20, 2012
  2. shrtrnd


    Jan 15, 2010
    I would guess the driver has a proprietary part number on it.
    The second line '0633' is probably the date code, made in 2006, 33rd week of manufacture.
    It might help if you gave us the manufacturer of the cooking plate, someone here
    might know their numbering system for the plate manufacturer.
    It's a long-shot, but probably the best option right now.
  3. OLIVE2222


    Oct 2, 2011
    Hi, my bet is that it can be an optocoupler. According to the PCB layout the component is located across an isolation area and there is an agency approvals marking on the package.

  4. pawel1812


    Feb 21, 2012
    Probably, optocoupler is HCPL-3120

    Marking method is typical for Agilent, Avego, HP

    Last edited: Feb 22, 2012
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day