Connect with us

Finding probes for my cheapy o-scope

Discussion in 'Electronic Basics' started by [email protected], Nov 3, 2005.

Scroll to continue with content
  1. Guest

    I got a BP Precision 1403A on ebay for almost nothing but there were
    no probes with it. I saw what appeared to be generic , one size fits
    all, in Jameco cat. Is this true? Or are they specific to ea
  2. JeffM

    JeffM Guest

  3. Rich Webb

    Rich Webb Guest

    If you want a perfect match and performance that meets the
    manufacturer's specs then only the original equipment probes will
    do. On the other hand, a good quality after-market probe will work
    just fine, especially since the scope itself just might possibly
    not be up to original specs.
  4. Guest

    I couldn't ever find the probes specific to this unit. I'll get the
    Jameco once for my 10$ scope
  5. mike

    mike Guest

    Make sure that the calibration range of the probe includes the actual
    input capacitance of your scope input.

    Wanted, Serial cable for Dell Axim X5 PDA.
    Return address is VALID but some sites block emails
    with links. Delete this sig when replying.
    FS 500MHz Tek DSOscilloscope TDS540 Make Offer
    Bunch of stuff For Sale and Wanted at the link below.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day