Connect with us

FIC relay cross-ref?

Discussion in 'Electronic Repair' started by DaveC, Feb 18, 2006.

Scroll to continue with content
  1. DaveC

    DaveC Guest

    Relay by asian fmr. FIC, model FRA1C-S (12vdc). Looking for cross to P&B,
    Omron, anything!

    Since it's a PCB mount, I'm trying to find pin-compatible replacement.

    Thanks,
     
  2. You'd better tell us a picture of the relay
    or what kind of relay it is ( pcb style, numbers of contacts,
    size , mechanical dimensions, etc..)
    regards;
    @+
    Matthieu
     
  3. SQLit

    SQLit Guest


    My experence is unless the relay is a standard base your in for calling the
    OEM manufacture.

    Like the other poster mentioned, no layout and pin out, and load requirement
    we would be guessing.
     
  4. Chances are excellent that it's a standard pinout, dimensions, contact
    rating, and coil resistance (or close enough). Just have somebody who
    knows what they are doing check a catalog for you.


    Best regards,
    Spehro Pefhany
     
  5. Guest

    Try the FIC relay home page cross reference at:

    http://www.ficrelay.com.hk/gen.php?cat=cross

    HTH
     
  6. ehsjr

    ehsjr Guest

  7. Doug

    Doug Guest

    use the cross at www.nteinc.com
    Dont enter the complete number just use FRA1C
     
  8. DaveC

    DaveC Guest

    Thus spake :
    Ed, sir. Thanks you so much for the reference. I searched much for the FIC
    web page, but couldn't shake it loose from the 'net. It turned up the PDF
    data sheet for the original relay, which is of non-standard layout, being an
    offset-T-shaped affair.

    Amazingly, NEC sources the FIC relays for their line which is available in
    almost any electronics retailer.

    Thanks again for your great help.
     
  9. DaveC

    DaveC Guest

    Thus spake Doug:
    Doug. Thanks so much for this. I never think to try NTE for anything but
    resistors and such. I'm shocked that they carry the relay, available at a
    store nearby.

    Thanks again,
     
  10. Nonesense. It's a not-great copy of the old, and rather poorly
    designed, P&B T-90. Made by scores of different manufacturers.

    Best regards,
    Spehro Pefhany
     
  11. DaveC

    DaveC Guest

    Thus spake Spehro Pefhany:
    Live and learn. Thanks. One more thing to put in my (quickly-draining) memory
    bank.
     
  12. Doug

    Doug Guest

    you're welcome
     
  13. ehsjr

    ehsjr Guest

    Wasn't me - it was Mr.E who gets the thanks.
    Ed
     
  14. DaveC

    DaveC Guest

    Thus spake ehsjr:
    Ah, I'd mis-read your attribute "Nice link! Ed" as "Nice link Ed!"

    Thank you, Mr. E! I'm on the right trail now.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-