Connect with us

FFC Connector fix?

Discussion in 'Troubleshooting and Repair' started by bhodgins, Feb 18, 2010.

Scroll to continue with content
  1. bhodgins

    bhodgins

    2
    0
    Feb 18, 2010
    Hi,

    This is my first post on here, and I'm hoping someone can offer some advice on a electronics problem, and maybe I can answer some posts where they may fall within my experience.

    I have a Infocus LP240/250 projector with a broken FFC connector locking clip. I am hoping to find a new connector, in which I can remove the clip and replace the broken one. The problem is after looking around online and talking to DigiKey, I can't determine who the manuacturer of the connector is.

    Here are the details and photo:
    FFC 30 position SMT, right angle, 0.5mm pitch, top contact, ZIF push type lock.
    The body is black, and the lock is brown. FCI uses the black/brown combination, but their current connector locks don't match.

    The photo shown is showing a good connector with the lock intact:
    [​IMG]

    Any help or hints would be greatly appreciated.
    If anyone has a dead Infocus projector, I can help troubleshoot it.

    Cheers,

    B
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-