Connect with us

FFC Cable

Reply to Thread

Discussion in 'Datasheets, Manuals and Component Identification' started by Fozzy3k, Jul 7, 2020.

Scroll to continue with content
  1. Jul 7, 2020 #1
    Fozzy3k

    Fozzy3k

    12
    0
    Jul 2, 2020
    1.jpg 2.jpg Hi all I’m hoping for some more help with finding what this cable is I know that it’s some kind of ffc 36way 1mm pitch but what’s the silver coating and longer earth. Best place to get a replacement :) thanks again

    Steve
     
  2. Jul 7, 2020 #2
    Martaine2005

    Martaine2005

    3,069
    845
    May 12, 2015
    https://www.google.co.uk/amp/s/uk.r.../c/cables-wires/ribbon-flat-cable/ffc-cables/
    RS have many types.
    The silver coating is more than likely shielding either for heat or RF.

    I don’t think there is a real reason for one side being longer other than where the cable bends, it would make sure it terminates the same length at the connector.
    Wiring looms use the same principle. Outside wires are longer than inside wires.
    I could be wrong of course.

    Martim
     
    davenn and Tha fios agaibh like this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Help identifying FFC

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-