Connect with us

fet multimeter

Discussion in 'General Electronics Discussion' started by wongwing, Jun 13, 2013.

Scroll to continue with content
  1. wongwing


    Jun 13, 2013
    I have a micronta multimeter 206,but the j fet had burn out. I can not find out the Sharp 3001 original J fet to repair it .I had use the fm 1008. 2n598 ,nte 461.etc. it just works a little time.then the j fet leaking , the multimeter became low moving. i found that the fet have the j switch fet that is diferrent with j fet. please any one can help me to find out the correct part for the J fet.Thanks.
  2. KrisBlueNZ

    KrisBlueNZ Sadly passed away in 2015

    Nov 28, 2011
    Do you have a schematic diagram for the multimeter? Can you post it?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day