Connect with us

Ferguson TX100 chassis T.V

Discussion in 'Electronic Repair' started by M.Joshi, Jan 18, 2005.

Scroll to continue with content
  1. M.Joshi

    M.Joshi Guest


    I'm trying to repair a Ferguson TX100 chassis T.V. I have looked a
    various T.V repair help sites but cannot determine what the fault is?

    The T.V just suddenly went dead while it was on. The standby light i
    off but it seems that there is power going to the CRT heater.

    Any help would be greatly appreciated
  2. Well get out that Mulimeter and start measuring the Voltages.
    Look for shorted components or bad filter caps even dry
    joints on the printed board.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day