Connect with us

Female to Female Header

Discussion in 'Datasheets, Manuals and Component Identification' started by 7seg, Aug 15, 2013.

Scroll to continue with content
  1. 7seg

    7seg

    2
    0
    Aug 15, 2013
    There has to be a really obvious reason I cant find these...

    I am looking for Female to Female header strips.

    I have DFRobot LCD display, that has a selection of pins on top that are male. Some of these pins I want to use, for example 5v pin, to power other components.

    So if I have a male jumper cable and a male pin on the LCD PCB I cant get a good temporary connection....

    So I would like a strip of female to female headers so I can temporarily connect to it. Otherwise I have to solder or start pulling the male pins out which just gets messy.

    So is my googling not up to scratch or do they not exist?

    Thanks
     
  2. davenn

    davenn Moderator

    13,838
    1,952
    Sep 5, 2009
    hi
    welcome to the forums :)

    not sure what you mean by that ? do you mean female on both ends of a cable ?
    as in a hard disc drive etc cable in a puter ?

    those female headers come in all sizes

    or do you mean a connector strip that has female on both sides ?
    which seems kinda pointless as you would then be putting a male strip into it

    you really just need a female strip to cable ... in which case you could try an old HDD ribbon cable and just trim the strip connector down to size for what you need...
    if that works ... you could if you wanted to, then buy a small female conn.

    Dave
     
  3. 7seg

    7seg

    2
    0
    Aug 15, 2013
    That one - but I wouldn't put a strip of male into instead using jumper cables to select a few a pins.

    Some thing like this:
    here

    But female both sides.

    Suppose I could use an IDE but its a bit bulky.

    EDIT: I'm stupid just found some female to male jumper cables here which is much better.

    Sorry for the time wasting!
     
    Last edited: Aug 16, 2013
  4. davenn

    davenn Moderator

    13,838
    1,952
    Sep 5, 2009
    no time wasting :)
    its always good to ask
    hope to hear from you again

    cheers
    Dave
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-