Connect with us

feedback

Discussion in 'Beginner Electronics' started by Richard, Nov 6, 2006.

  1. Richard

    Richard Guest

    I have built a full size Dalek. For the voice I made a little kit with a mic
    plugged in so it sounds like a Dalek. Its not very loud though. I have tried
    two differant amps, a 45w and a 7w one. Both suffer from terrible feedback.
    How do I stop feedback, apart from having the gain up too much?
    Thanks
    Richard
     
  2. PeterD

    PeterD Guest

    Traditional method is a (very) directional microphone, and speaker.

    Also used are time delay circuits, along with an echo canceler.

    Just how loud do you want your Dalek to be? I don't recall any that
    I've met as being that loud. And their vocabulary was limited...

    Exterminate... Exterminate... Exterminate...

    Maybe use a tape instead? <bg>
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-