Connect with us

FCC certification for nrf24l01+

Discussion in 'General Electronics Discussion' started by bobdxcool, Mar 27, 2015.

Scroll to continue with content
  1. bobdxcool

    bobdxcool

    79
    0
    Mar 9, 2012
    Is nrf24l01+ from Nordic Semiconductors FCC certified ? It is hard to find out from their datasheet whether FCC approved ?
    Is it FCC approved ?

    If it is approved and I use it in my PCB and control it via my ARM cortex processor, do I need to get the entire PCB board FCC approved ?

    Also, I am using sierrra wireless HL series modem chip which is FCC approved. This will also be on my PCB. So, do I have to get my PCB FCC approved again although my modem is FCC approved ?
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    9,646
    2,016
    Nov 17, 2011
    The nrf24l01+ is an IC which will not be certified at all. Certification as far as I know always includes a complete device.
     
  3. Gryd3

    Gryd3

    4,098
    875
    Jun 25, 2014
    I am under the impression that even if the wireless module was certified, you would still need your finished product to get certified anyway as the housing, additional antenna, and power supply would skew any results that allowed the module to be certified anyway. Perhaps I am wrong on this.
     
  4. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,298
    2,736
    Jan 21, 2010
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-