Connect with us

faulty Body control Module transit connect 55 plate

Discussion in 'Troubleshooting and Repair' started by blogan, Feb 24, 2013.

Scroll to continue with content
  1. blogan

    blogan

    2
    0
    Feb 24, 2013
    I have traced the fault in my central locking system to a small white ceramic fuse soldered to the board on my control module no other damaged components and no scorching etc i have removed said fuse which i cannot get continuity across the only markings are very small symbols which i can find no reference to anywhere i can't even describe them accurately there is also the number 41 printed in very faint grey I cannot find a schematic any ideas how i would identify this in order to find a suitable replacement.
     
  2. blogan

    blogan

    2
    0
    Feb 24, 2013
    further info fromboard screen print 659729.21.02 b Siemens i have tried all the searches and datasheet sites suggested in the sticky with no joy even emailed a few email addresses at seimens as expected havent had any response.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-