Connect with us

Fan help

Discussion in 'General Electronics Discussion' started by Torin, Nov 7, 2016.

Scroll to continue with content
  1. Torin


    Nov 7, 2016
    I'm trying to hook up these 2 bilge fans in parallel to this speed controller. They will be powered by a car battery. I don't know a lot about electronics, is it possible that I will run too much power to the fans if I turn the fans to the max possible speed? How do I hook this up safely? Thanks. Links to the products i'm using above.
  2. dorke


    Jun 20, 2015
    Welcome to EP.

    Should be o.k
    The controller is PWM and can supply up to 10A
    The fans are 2.5A each .
    You can also fuse each fan(separately !) with a 5A fuse .

    In this kind of parallel operation the fans will work at about the same speed.
    If separate control is required ,you should use a separate controller for each fan.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day