Connect with us

F/S: Barry shock mounts for equipment

Discussion in 'Electronic Repair' started by [email protected], May 15, 2004.

Scroll to continue with content
  1. Guest

    BARRY SHOCK MOUNTS: these are used to cushion radios and other
    electronic equipment from vibrations in vehicles or aircraft. Three
    available: (The smaller type looks brand new)
    1. Barry 1057-9 is a small single mount with two mounting ears on
    bottom and a single 8-32 threaded hole on top, good for supporting
    about 0.5 to 1.0 lbs. Asking 40 cents each or 4/$1.50 Shipping extra.
    2. Barry 1057-6 is same as above, but with stronger spring to hold
    about 1 to 2 lbs weight. Same price.
    3. Barry 1057-5 is a larger dual unit with a plate on top w/ 4 bolt
    holes and will handle about 2 to 6 lbs. 80 c or 4/$2.50
    All are mostly aluminum, wt. 1.5 oz ea. for the singles and 6 oz.
    for doubles. Small orders sent first class or priority mail. Photo
    available on request. Please REMOVE the "NS" from my email to reply or
    334-347-5281 day/eve/wknd.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day