Connect with us

EPROM programmer adapters

Discussion in 'Electronic Equipment' started by Dead Druid, Mar 18, 2005.

Scroll to continue with content
  1. Dead Druid

    Dead Druid Guest

    I've recently bought a Data I/O System 19 EPROM programmer, which came with
    some adapters. Can you tell me how to use them? They are:

    o "702-1072 plugin adapter", with paper label: 910-1417B
    o "702-1073 plugin adapter", with paper label: 910-1416-1G
    o "Intel 8751 adapter module", labelled: PBA 162697-003 REV D
    o "8748 adaptor", labelled: PWA 1000715 010

    Please note:
    o "adaptor" is not my spelling, it's written this way on the board.
    o The first two adapters do not fit in a "standard" 28 pin ZIF socket, as
    the two rows of pins are too far apart, and there are mounting pillars
    between the rows!
    o The two Intel adapters could fit in a standard 24 or 28 pin ZIF (I
    didn't count the pins).

    Any help appreciated.

    Mark
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-