Connect with us

EPROM Merging howto

Discussion in 'Beginner Electronics' started by Steve Lewinsky, Mar 7, 2004.

Scroll to continue with content
  1. I would like to know how you go about merging say 4 2732A eproms into 1
    27128 EPROM. I use the copy /b prom1.bin+prom2.bin+prom3.bin+prom4.bin to
    make the image and burn it onto the new eprom. But now where would I jumper
    to the old board sockets to address the new banks of info on the new eprom?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-