Connect with us

EPE V2 PC Scope

Discussion in 'General Electronics Discussion' started by behunter, Feb 26, 2012.

Scroll to continue with content
  1. behunter

    behunter

    3
    0
    Feb 26, 2012
    Has anyone built the EPE V2 PC scope? I would like to build one, but with a USB interface. Has anyone already done this? An alternative, I suppose would be a USB/serial adaptor lead. Any thoughts on this?

    Bryan
     
  2. davenn

    davenn Moderator

    13,782
    1,934
    Sep 5, 2009
    Hi Bryan
    welcome to the forums :)

    have you got any links to the project ?

    converting it to USB is making it somewhat more complex its going to take some additional programming to interrogate the USB for the data.
    Assuming that the existing project is using RS232, why dont you just use a standard RS232 to USB converter dongle ?

    but whatever way you go, GET the project working in its original form before any oddball modifications :)

    Dave
     
    Last edited: Feb 27, 2012
  3. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,480
    2,826
    Jan 21, 2010
    Not me, but perhaps you can provide a link to this project.
     
  4. behunter

    behunter

    3
    0
    Feb 26, 2012
    The article appeared in Everyday Practical Electronics Aug/Sept 2007.
     
  5. behunter

    behunter

    3
    0
    Feb 26, 2012
    Yes, I think I'll have a go and try what you suggest.

    Bryan
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-