Connect with us

Encrypted RF Signal?

Discussion in 'Radio and Wireless' started by elmousa68, Aug 20, 2018.

  1. elmousa68

    elmousa68

    13
    0
    Apr 27, 2011
    I have a requirement for an rf transmitter/receiver setup where the receiver is to respond only if a certain code is transmitted or if the transmitted signal is encoded/encrypted in a manner that only a receiver with the matching circuit/hardware can receive it. I would appreciate it if you can direct me to resources/circuits/hardware that can address this requirement.

    Thank you.
     
  2. kellys_eye

    kellys_eye

    4,289
    1,143
    Jun 25, 2010
  3. davenn

    davenn Moderator

    12,996
    1,661
    Sep 5, 2009

    CTCSS is another very common method
     
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...