Connect with us

EMERSON TV-VCR COMBO

Discussion in 'Electronic Repair' started by Angulos, Feb 2, 2004.

Scroll to continue with content
  1. Angulos

    Angulos Guest

    I have this Emerson TV-VCR combo, model VT1322. The set was dropped and the PCB
    craked at some point near the regulator. I've soldered all the broken traces
    and connected all the wires again..The VCR portion seems to be working ok, but
    the TV doesn't!. I found the HOT shorted which I've replaced with same exact
    one and this new one shorted again...I don't have any voltage on the Collector
    therefore none on the E/B...Don't see any shorts on the traces I fixed. Can
    someone give me a hint of where else to look for this problem?.
    TIA
    Alphie
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-