Connect with us

electronik beam

Discussion in 'General Electronics' started by Stan, Oct 7, 2003.

  1. Stan

    Stan Guest

    Hi Group, Can someone help please, I have an Advance instrument
    Oscilloscope ser#02123, that is giving a fat beam, about 3/8 of an
    inch thick, I tried to adjust the astig. and thats about all I can
    reduce it to. so, any info on this matter will be taken seriously, and
    you will be rewarded with my sincere gratitude, thanks, Stan.
     
  2. JeffM

    JeffM Guest

    You may be having problems with the focus circuit,
    usually a moderately high voltage applied to a focus grid on the CRT.
    Got a HV probe and a schematic?
     
  3. Stan

    Stan Guest

    I don't have a probe or schematics, I trace the leads to the
    astig.pot, and I got 165v, to high...?
     
  4. JeffM

    JeffM Guest

    We can't pull this stuff out of our asses.
    You need manufacturer's data.
     
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-