Connect with us

Electronic Cleaner on ICB

Discussion in 'General Electronics Discussion' started by Drewcifer, Sep 24, 2014.

Scroll to continue with content
  1. Drewcifer

    Drewcifer

    2
    0
    Sep 24, 2014
    Can you spray the whole board?
     
  2. Gryd3

    Gryd3

    4,098
    875
    Jun 25, 2014
    What kind of cleaner and what kind of components?

    details details, they always help.
     
  3. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,500
    2,840
    Jan 21, 2010
    Yes. Unless there are any reasons you can't.
     
  4. Drewcifer

    Drewcifer

    2
    0
    Sep 24, 2014
    Sorry it took me so long to reply. I Did it anyways. It was a car ECU. I hit the board, contacts and it solved my problem. I was having stalling issues, and erratic surging during acceleration. The problem would come and go but was incredibly frustrating. I replaced the IAC as some had suggested but it didn't work. I used QD contact cleaner. It runs great now. I drive a Dodge Stealth, (I also have a 3000GT VR-4...same car) and they are susceptible to having the caps leak. I found no evidence of this when I tore it apart however. I knew there must be some problem with the ECU, because the tach would drop to ZERO when it was stalling but still at some RPM, and would even recover from these zero RPM states. Even though a "pro" that knows these cars basically called me a moron for even considering that the contacts may be my problem and cleaning them would not fix it...that was the solution.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-