Connect with us

Electronic ballast for fluorescent tubes

Discussion in 'Lighting' started by smasher, May 13, 2006.

Scroll to continue with content
  1. smasher

    smasher Guest

    Hello all

    I'm writing master thesis about electronic ballasts for fluorescent
    tubes. Main task of this thesis is to elaborate ballast frequency
    control. I should do it on ballast E-40 made by GAMASONIC, but I'm
    looking for any information about electronic ballasts, ways to
    control/modificate frequency (If it is possible).

    Thank you in advance for your answers and clues.

    cheers
     
  2. There are a lot of technical papers written about electronic
    ballasts. You can also find information in patents. All of
    this information is very easy to find. Since this is for
    your Master's Thesis you should really do your own research.

    --
    Vic Roberts
    http://www.RobertsResearchInc.com
    To reply via e-mail:
    replace xxx with vdr in the Reply to: address
    or use e-mail address listed at the Web site.

    This information is provided for educational purposes only.
    It may not be used in any publication or posted on any Web
    site without written permission.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-