Connect with us

Electrical Engineer for job in Berwick, PA

Discussion in 'Hobby Electronics' started by [email protected], Jan 30, 2008.

Scroll to continue with content
  1. Guest

    Minimum of 5 years electrical - I&C engineering experience preferably
    with 3 years in an operating nuclear power plant (preferably some or
    all at SSES) performing the following activities with indicated
    qualifications.
    Harware familiarity, cable, connectors, terminations, instruments,
    PLC's, etc.
    Installation/work packages including preparation of detailed work
    instructions, Cut Sheets, identification of materials, etc.
    Knowledge of NEC Codes and Nuclear Electrical Separation standards,
    A self-starter, capable of meeting program objectives without benefit
    of extensive direction.
    Capable of working and resolving problems with a minimum of
    supervision and assistance.
    Capable of producing quality work in a timely manner and meeting
    established schedules.
    Strong communication skills and computer skills.
    Experience interfacing with craft, engineering and operations
    personnel.
    Additional Desired Qualifications _
    Nuclear operating system knowledge.
    Experience writing test procedures and serving as a test director.
    Cross discipline experience, i.e. tubing, cable routing, cable raceway
    design, etc.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-