Connect with us

Electric paint ...

Discussion in 'Datasheets, Manuals and Component Identification' started by Pikkie, Aug 5, 2018.

  1. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,035
    2,616
    Jan 21, 2010
    If you have a use for it, yes; otherwise no.
     
    Braeden Hamson and kellys_eye like this.
  2. Braeden Hamson

    Braeden Hamson

    195
    13
    Feb 18, 2016
    Hahaha Thats very pragmatic

    Pikkie it's ~$8 the only way you'll know if you like it is if you buy it. The question with it though is what its resistance per cm, or so. It be pretty useless if the paste sucks up all the power before the LED gets its fill.

    I personally don't see that stuff being good at items 2 and 3. 2 Just use a sodding iron XD
    as for 3 this stuff is really good at that

    Silver paste

    My two cents. Buy it and report back to us :)
     
  3. Pikkie

    Pikkie

    2
    0
    Dec 12, 2017
    I mean to re-do bad or oxidized carbon contacts in a tv and dish remote controle. As it is recommended for it. Remote controls work better in dry summer months but now here in RSA its winter it should... I hope it do a better contact. Thou this so-called paint is water based I wonder. Ok I'll get and try it anyhow.
     
  4. Braeden Hamson

    Braeden Hamson

    195
    13
    Feb 18, 2016
    Oh for fixing remotes the silver paste works well.
     
  5. Externet

    Externet

    665
    135
    Aug 24, 2009
    Pikkie : Try a pencil. Rub the eraser onto the contacts, the tip to refill the faded carbon on the elastomeric buttons.
    If not happy on longevity, punch/make aluminium foil tiny discs and glue on top of the faded carbon surfaces of the button.
    If your remote shows some oily deposits on the board contacts, wash with soap, dry with a fan and reassemble, and keep the remote wrapped in the same kind of clear bag they are shipped, or on 'saran' wrap.
     
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-