Maker Pro
Maker Pro

EFT suppress on notebook DC power cable?

R

Roger Liu

Jan 1, 1970
0
Hi, All

I noticed that on my notebook DC power cable there is a cylinder between the
DC converter and the output plug on my notebook. And on many consumer
electronics products such as Digital camera, that cylinder object also
exists. I guess that there is a EFT choke coil inside it. Is that right? If
so, is there any information on that? For example, Standard, Spec, Product
Ads...

I am interested on that because recently I am doing a project for suppress
EFT on nano order. Neither diode or TVS could suppress that kind of EFT.


Thanks and Regards

Roger
 
P

Peter A Forbes

Jan 1, 1970
0
Hi, All

I noticed that on my notebook DC power cable there is a cylinder between the
DC converter and the output plug on my notebook. And on many consumer
electronics products such as Digital camera, that cylinder object also
exists. I guess that there is a EFT choke coil inside it. Is that right? If
so, is there any information on that? For example, Standard, Spec, Product
Ads...

I am interested on that because recently I am doing a project for suppress
EFT on nano order. Neither diode or TVS could suppress that kind of EFT.


Thanks and Regards

Roger

It's normally a ferrite core through which the cable passes, I don't think there
is a full loop of cable through/around the core. Similar things are used on the
better quality monitor leads and Epson fit them a lot on their PSU's for
scanners etc.

You can buy clip-over cores with plastic covers from the main distributors.

Peter
 
Top