Connect with us

EEPROM boots w/o addressing

Discussion in 'Electronic Components' started by Werty, Mar 3, 2007.

Scroll to continue with content
  1. Werty

    Werty Guest

    Simple , low cost , EEPROM , that

    spits out data from address

    0000 , just by powering it up ,

    and clocking it .

    Does it exist ?

    Its always bothered me to address

    a simple low speed , serial device .


    They could have built them to

    boot w/o addressing .....

    and better !

    There's enuf pins to use 2 pins to

    be jumpered on the board to select

    which boot block to boot , w/o addressing .

    I'm building a UART loader .

    The EEPROM will establish comm

    by sending all the right stuff to an ARM

    MCU and then continue on with loading

    a program to the ARM .
  2. TT_Man

    TT_Man Guest

    No, it doesn't exist.... what about processors that vector to FFFF and go
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day