Connect with us

Easy Prog

Discussion in 'Electronic Basics' started by lerameur, Sep 16, 2006.

Scroll to continue with content
  1. lerameur

    lerameur Guest


    i just bought the easyProg board from

    I bought the PCB board from thm and ordered the parts form digikey but
    I had many parts here.
    The circuit voltage seems to corespond to the data sheets of embedinc.
    My problem is the oscillation, I and no 20Mhz oscillation. I took the
    chip Pic16F648 and put itin a bread board with a 20Mhz crystal,
    capacitor and I still dont get any oscillation.
    1- Do I need to program that chip for it to oscillate ?
    2- Is oscillation from that Pic necessesary to burn a chip ?


  2. .....

    I don't understand your questions
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day