Connect with us

Eagle layer colors

Discussion in 'Electronic Design' started by Robert Baer, Dec 16, 2013.

Scroll to continue with content
  1. Robert Baer

    Robert Baer Guest

    SET COLOR_LAYER 51 White; # shows as LGray <--WHY??
    SET FILL_LAYER 51 1;
     
  2. Looks white to me. Try a screen update. F2

    Cheers
     
  3. Robert Baer

    Robert Baer Guest

    Made zero difference.
    The View/Display pulldown shows LGray and a 0603 shows a light gray box.
    R-issued those commands by hand; no difference. F2 has no visible effect.
    NO white.
     
  4. Are you sure the object is on layer 51?
    Maybe Topplacemnt layer?

    Cheers
     
  5. Robert Baer

    Robert Baer Guest

    Just READ those commands; isn't "51" fifty-one?
     
  6. Robert Baer

    Robert Baer Guest

    Just READ those commands; isn't "51" fifty-one?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-