Connect with us

Dynamic Microphone Modification?

Discussion in 'Electronic Basics' started by Radio Man, Mar 8, 2005.

  1. Radio Man

    Radio Man Guest

    I would like to use a dynamic mic with my computer which
    normally takes an electret microphone. How would i go about
    making a modification to achieve the above?
     
  2. Bob Masta

    Bob Masta Guest

    Electret mics need a supply voltage, which your dynamic mic
    doesn't want to see. The supply voltage is usually on the
    "ring" part of a stereo connector used for the (mono) mic.
    So if you just wire up your connector using only the tip
    and sleeve, you should be OK.

    Best regards,


    Bob Masta
    dqatechATdaqartaDOTcom

    D A Q A R T A
    Data AcQuisition And Real-Time Analysis
    www.daqarta.com
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-