Connect with us

DX Antenna DSZ200 actuator Circuit Failed

Discussion in 'Sensors and Actuators' started by toddbailey, Apr 7, 2007.

Scroll to continue with content
  1. toddbailey


    Apr 7, 2007
    Trying to repair this, receiver works but dish positioner circuits have failed.
    stuck on 1 sat.
    fuses and power supply ok, no operation from front panel, I can change channels however from the panel.

    any one know where I can download a schematic (free?) and or what to look for.

    btw: had serious grid power failure before discovering recv failed. Hi winds, trees and power lines don't mix.
  2. JMilisitz


    Dec 2, 2010
    look on

    you may need to get a new fuse

    they should bury powerlines. its actually cheaper
    Last edited by a moderator: Dec 2, 2010
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day