Connect with us

DVD Player Won't Release DVD

Discussion in 'Electronic Repair' started by [email protected], Mar 23, 2007.

Scroll to continue with content
  1. Guest

    I hope someone can help me. I played a DVD in my Sony player and, when
    it was over, used Open button on my remote. The screen said Open
    ----but it doesn't open. I also tried the Open button on the box
    itself....still not opening. Thanks in advance for any help you can
    give me.
     
  2. Arfa Daily

    Arfa Daily Guest

    Model number ? Does it even try ( sound of motor trying to run ) ? Has the
    disc definitely stopped rotating ? Does it re-play ok and all other
    functions still work ? Have you tried a full power down reset ( unplug it
    and leave it off-power for a minimum of 10 minutes ) ?

    Arfa
     
  3. Pull the power cord and wait a day.
     
  4. Tim

    Tim Guest

    Here's a thought.

    If the DVD was a rental (or previously viewed purchase) and had a
    sticker on it, it may have stuck to the spindle magnet and jammed the
    drawer so it cannot open. It will stay play fine in the machine, but you
    won't be able to get it out. You have to open the player up and unstick
    it, then it will eject ok.

    Been there, done that. Had to buy the guy a new dvd because my player
    tried to open the drawer anyways and scratched up the DVD that was stuck
    to the magnet. The DVD skipped a lot after that. I fixed it after the
    fact though, using the CD doctor stuff, so at least I ended up with a
    playable dvd.

    - Tim -
     
  5. Sounds like one of those rotten "dvdceiver" models.

    Yick.


    Mark Z.
     
  6. Guest

    I unplugged it for a few minutes and when I powered on, it opened
    immediately.
    This was a rental Nexflix DVD from an old BBC series, so perhaps it was
    a faulty DVD. Thanks for your helpful responses.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-