Maker Pro
Maker Pro

DSC PC1555

L

Longfeather

Jan 1, 1970
0
I have a PC1555 system in my shop, I'm going to add two window in on the
system zone 4 and zone 5. I want to make both windows a 03 instant zone How
can I do that?
I know how to wire it, it's just programming it that I need the help with. I
don't know the master, installer's or maintenance code. I can find out if I
need to.
Thanks for any help that anyone can give me.

Al Wood
 
P

Peter Sackmann

Jan 1, 1970
0
Longfeather said:
I have a PC1555 system in my shop, I'm going to add two window in on the
system zone 4 and zone 5. I want to make both windows a 03 instant zone How
can I do that?
I know how to wire it, it's just programming it that I need the help with. I
don't know the master, installer's or maintenance code. I can find out if I
need to.
Thanks for any help that anyone can give me.

Al Wood
 
P

Peter Sackmann

Jan 1, 1970
0
I take it you don't have anything yet on zones 4 & 5? Because if you do, no
additional programming would be required. If you don't, you would need the
installer code.Press *8 and installer code; then 001; go to zone 4 (by
repeating the entries in zone 1 thru 3) and enter 03 twice (once for zone 4
& once for zone 5); press#; enter202 and make sure 4 &5 are active; press#
twice (to exit programming). You are done (unless your system is monitored,
in which case you would have to enter the central station reporting coded
for new zones in register 320 before exiting).
 
Top