Maker Pro
Maker Pro

DSC Maxsys PC4020 v3.4SX

A

Anonymous

Jan 1, 1970
0
I have the downloader software installed for downloading this system
however, I cannot find the driver for the software on the DSC website. DSC
Tech support has said it is available from the Simplex/Tyco website.
Searched there with no luck. If anyone possibly has a link to where this
version can be downloaded it would be much appreciated. I have DLS 2002 SP2
installed and the only near-match support for downloading is the 4020 v3.3
and 3.5. Thanks for any info provided.
 
A

AnotherAnonymous

Jan 1, 1970
0
Thanks for your reply. After further digging I finally spoke to our Simplex
rep and he said its a propriatary chip for Simplex only and that the driver
for DLS is not publically available. Its a MaxSys PC4020A, and the chip can
be changed without further operation problems? This chip is socketed on the
board.
 
P

Petem

Jan 1, 1970
0
i<ve change many chip on those panel,most of the time to change there
language,and to upgradfe revision,never got any trouble...

you will have to reprogram it all,especially if its from a custom build
chip...
 
A

AnotherAnonymous

Jan 1, 1970
0
Great, thank you both. I'll give it a shot.

AnotherAnonymous said:
Thanks for your reply. After further digging I finally spoke to our
Simplex rep and he said its a propriatary chip for Simplex only and that
the driver for DLS is not publically available. Its a MaxSys PC4020A, and
the chip can be changed without further operation problems? This chip is
socketed on the board.
 
M

Matthew Root

Jan 1, 1970
0
The program will update the drivevs itself from within the help section
 
Top