Maker Pro
Maker Pro

DSC 1832 and Tlink 250

jimbeckel

Nov 16, 2009
2
Joined
Nov 16, 2009
Messages
2
Has anyone successfuly installed a DSC 1832 panel and Tlink 250 and gotten the Tlink module to send an email upon alarm,openings, closings and troubles. I am upgrading my old DSC Power 832 to the 1832 and don't have a Pots line in the house ( using VOIP from Vonage). I have read other posts regarding people trying to do similar installs but not a lot of details. My buddy is a serious network guy and I install alarms for a living just curious if anyone has tried this. I have downloaded the DLS and Tlink console software so I believe I am ready to tackle this, just might need a few pointers. Thanks, James
 
Top