Connect with us

Driving Servo using FPGA

Reply to Thread

Discussion in 'Microcontrollers, Programming and IoT' started by mrbazooka, Oct 19, 2011.

Scroll to continue with content
  1. Oct 19, 2011 #1
    mrbazooka

    mrbazooka

    2
    0
    Oct 19, 2011
    I used this verilog code to program the servo but the problem is that the servo moves 90 degrees only in the anticlockwise direction. I need someone to help me so that the servo moves 90 degrees clockwise too. I have attached the verilog code I am using. any help will be appreciated :) :confused:
     

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. FPGA

  2. FPGA

  3. FPGA

  4. Using a microcontroller to turn a servo

  5. Driving a powered speaker using a microcontroller

  6. SERVO ANGLE

  7. Arduino servo code

  8. WT-servo-16

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-